Install IonCube Loader on InterWorx

While InterWorx automatically installs many PHP modules via RPMs, there aren't any available for ionCube's PHP loaders.

Installing ionCube on an InterWorx Server with MultiPHP

Installing the ionCube loaders follow the same basic process regardless of the version of PHP you are installing it in, but the exact locations vary depending on the PHP version itself.

Download and Decompress the Latest ionCube Loaders

HostDime only sells 64-bit servers, so although ionCube is available in 32-bit and 64-bit versions, these directions will only cover the 64-bit version.

1. Download the appropriate version of the loaders:

   Download for 64-bit Loaders

   cd; wget https://downloads.ioncube.com/loader_downloads/ioncube_loaders_lin_x86-64.tar.gz

2. Now decompress the loaders you just downloaded:

   Decompress the 64-Bit Version

   tar xfz ioncube_loaders_lin_x86-64.tar.gz

3. Enter the ioncube loader directory you just decompressed and change the permissions of the .so files to 755 and for safety, change the ownership to root:

   cd ioncube
   chmod 755 *.so
   chown root: *.so

Copy the Loaders to the Appropriate PHP Module Directory

Now you need to copy the loader(s) into the proper location for each version of PHP you have installed.

cp -p ioncube_loader_lin_5.4.so /usr/lib64/php/modules/

cp -p ioncube_loader_lin_5.4.so /opt/remi/php54/root/usr/lib64/php/modules/

cp -p ioncube_loader_lin_5.5.so /opt/remi/php55/root/usr/lib64/php/modules/

cp -p ioncube_loader_lin_5.6.so /opt/remi/php56/root/usr/lib64/php/modules/

cp -p ioncube_loader_lin_7.0.so /opt/remi/php70/root/usr/lib64/php/modules/

cp -p ioncube_loader_lin_7.1.so /opt/remi/php71/root/usr/lib64/php/modules/

cp -p ioncube_loader_lin_7.2.so /opt/remi/php72/root/usr/lib64/php/modules/

cp -p ioncube_loader_lin_7.3.so /opt/remi/php73/root/usr/lib64/php/modules/

Add the ionCube Configuration to PHP

Now that you've put the loader in place, we need to tell PHP that it is there so that PHP can load the module.

echo "zend_extension = /usr/lib64/php/modules/ioncube_loader_lin_5.4.so" > /etc/php.d/00-ioncube.ini

echo "zend_extension = /opt/remi/php54/root/usr/lib64/php/modules/ioncube_loader_lin_5.4.so" > /opt/remi/php54/root/etc/php.d/00-ioncube.ini

echo "zend_extension = /opt/remi/php55/root/usr/lib64/php/modules/ioncube_loader_lin_5.5.so" > /opt/remi/php55/root/etc/php.d/00-ioncube.ini

echo "zend_extension = /opt/remi/php56/root/usr/lib64/php/modules/ioncube_loader_lin_5.6.so" > /etc/opt/remi/php56/php.d/00-ioncube.ini

echo "zend_extension = /opt/remi/php70/root/usr/lib64/php/modules/ioncube_loader_lin_7.0.so" > /etc/opt/remi/php70/php.d/00-ioncube.ini

echo "zend_extension = /opt/remi/php71/root/usr/lib64/php/modules/ioncube_loader_lin_7.1.so" > /etc/opt/remi/php71/php.d/00-ioncube.ini

echo "zend_extension = /opt/remi/php72/root/usr/lib64/php/modules/ioncube_loader_lin_7.2.so" > /etc/opt/remi/php72/php.d/00-ioncube.ini

echo "zend_extension = /opt/remi/php73/root/usr/lib64/php/modules/ioncube_loader_lin_7.3.so" > /etc/opt/remi/php73/php.d/00-ioncube.ini

Restart Apache and PHP-FPM

Now that everything is ready, you need to restart Apache and PHP-FPM if you are using it. This will cause the system to actively start using ionCube.

You have two ways you can restart Apache or PHP-FPM, you can run a command via the command line if you're running as the root user OR you can restart these things from NodeWorx.

Restart Apache and PHP-FPM via Command Line

Since you are already logged into the command line as root, it's probably easiest to restart Apache and PHP this way. Select the appropriate commands from the list below.

systemctl restart httpd

systemctl restart php-fpm
systemctl restart php54-php-fpm
systemctl restart php55-php-fpm
systemctl restart php56-php-fpm
systemctl restart php70-php-fpm
systemctl restart php71-php-fpm
systemctl restart php72-php-fpm
systemctl restart php73-php-fpm

Now you can check each PHP version to see if it is loading the ionCube loaders properly.

php -i | grep ioncube
/opt/remi/php54/root/bin/php -i | grep ioncube
/opt/remi/php55/root/bin/php -i | grep ioncube
/opt/remi/php56/root/bin/php -i | grep ioncube
/opt/remi/php70/root/bin/php -i | grep ioncube
/opt/remi/php71/root/bin/php -i | grep ioncube
/opt/remi/php72/root/bin/php -i | grep ioncube
/opt/remi/php73/root/bin/php -i | grep ioncube

The output from these various commands should look something like this if ionCube is working. If nothing is output, review the changes you made and ensure that they were made correctly for versions of PHP that you actually have installed.

# /opt/remi/php73/root/bin/php -i | grep ioncube
Additional .ini files parsed => /etc/opt/remi/php73/php.d/00-ioncube.ini,
For Loader updates visit www.ioncube.com/loaders.php
For support visit support.ioncube.com
This Loader also includes features for real-time error reporting and malware protection.  Visit ioncube24.com for more details.
ioncube.loader.encoded_paths => no value => no value    

Restart Apache and PHP-FPM via NodeWorx

If you'd like to use the NodeWorx GUI to restart Apache and PHP-FPM, you can follow these steps:

1. Log into NodeWorx as the primary admin user. Example: https://your.server.com:2443/
2. In the System Services section, select Web Server.
3. Restart Apache by clicking the small circular icon in between the start and stop icons.
   
4. If you are using PHP-FPM, click the Restart button in the Restart PHP-FRPM section below the Web Server Control section.
   
5. If everything restarted properly, you can check the system installed version of PHP to see if ioncube is enabled. Click on the PHP Info button in the PHP Information section.
   
   
6. Scroll down and check for mentions of ionCube. If you see some and it shows as enabled, then you know you did things correctly. To check the other versions of PHP that you have installed, follow the command line directions above since InterWorx does not include a way to check the PHP info of other installed versions of PHP.

Congratulations, you've successfully enabled ionCube in all versions of PHP.